Among all kinds of professional stage performances and lighting and audio rental activities,
LED par light is the most commonly used type of light fixtures. The color of the led is different, which determines the effect of the
par light,
red, green, blue, and three primary (Basic) colors. It is mostly used
for coloration effects to set off the stage atmosphere. The 2nd is
warm white color temperature of 3200K, which is used for
stage front lighting. It requires a
high color rendering index CRI90+ or higher, and it is required to show the true colors of the
background characters on the stage. Starting from the beginning of 2019,
according to market demand, dual-color temperature
front lights have been joined in, on the one hand to supplement the brightness of
the stage, on the other hand, the dual-color temperature adjustment
achieves a simple CTO simulation effect. When the brightness of the
stage is required, the lighting can be immediately supplemented. The
following will describe in detail the difference between the use of a
bottom light and
LED Wash Par Light.
As a warm light source, the standard requires a
color temperature of 3200K, but some customers choose 2800K according to the scene. (In recent years, some people have also chosen
dual-color temperature white light, adding
5600K color temperature lamp beads). Usually illuminate the entire stage area
from the top or both sides, and do basic lighting and frontal lighting
for the stage. The front light needs to cover the entire stage evenly,
its light is soft, and it mainly plays the role of lighting, providing a
good shooting effect for photography.
Professional front lights usually have very high requirements for color rendering index. General
photography studios require CRI95 and stage CRI90. Traditional front
light usually has a higher power.
The front light used in stage performances and rentals is generally 800W-1000W. It uses a
traditional light bulb to emit light and adjusts its brightness through a thyristor box, which
requires high power supply for the venue; Since 2012, with the
development of LED chip heat dissipation and packaging technology, LEDs
have gradually replaced traditional light sources. 150W COB LEDs can
replace 800W traditional light sources, and at the same time break the
disadvantages of higher color rendering index and lower brightness,
which is the most representative The type is Japan Citizen lamp beads.
There are also many excellent domestic manufacturers. If you need to
know more about it, please consult the online customer service of Five
Chromatography.
the popular LED Front Lights as the following:
For more information, please consult online customer service!
The LED Wash Par Light is mainly used to change the color and play the effect of rendering the stage.
The main colors are exactly the three primary colors of RGB, which we
often say, through the mixing of these three colors, up to 16.7 million
different colors. So how can we distinguish the quality of the color LED lighting source? That is to say, the wavelength should be better. However, when we buy led light fixtures,
it is impossible to carry a huge integrating sphere or light meter to
test at any time and any occastions. How to easily know the quality of
lamp beads? This is another question we need to look into.
Through
the following simple picture, we can clearly see that when the colors
interact, they will be mixed into a new color. If you can get the
correct magenta, cyan, yellow, and white colors, then the quality of the
light source of this led is very good.
the popular LED wash par Lights as the following:
For more information, please consult online customer service!
In
short, whether it is a traditional Par64 downlight or LED high color
rendering LED Lighting Sources, the front light is mainly used for
lighting, while the wash par light is used to change the color of the
scene and play the effect of wash and environment contrast. It cannot be
mixed, and the ideal stage lighting effect can be obtained through a
reasonable combination.
